• Opening Hours: 8:30am - 5pm weekdays and 9am - 2pm Saturdays (enquiries only)
  • Email Enquiry
  • Allplastics Sydney NSW
  • Allplastics on Instagram Allplastics on Facebook Allplastics on Twitter Allplastics on Linkdin Allplastics on Pinterest Allplastics on YouTube

 

Fabricating the Modern Dwelling

Fabricating-the-Modern-Dwelling-4-thumb

Innovative use or PEP-core STAGE Translucent Polycarbonate Panels.

Allplastics stocks and fabricates the unique Polycarbonate Translucent panels from Design Composite. The Stage 40 polycarbonate panels have an anti-scratch, slip resistant surface and can support a weight of 500 kilograms per square meter. We wanted to share and innovative project commissioned by The Museum of Modern Art in New York designed by award winning architect Kieran Timberlake in Philadelphia.

 
 
 

The following article is shared from kierantimberlake.com

How can we create a house that holistically advances architecture through agendas of on-site assembly, design for disassembly, and reuse of materials?

In 2008, 500 architects were asked to submit proposals for full-scale designs reflecting the current state and future potential of prefabricated architecture to be evaluated for exhibition at The Museum of Modern Art. Our scheme, one of five selected for construction on a site adjacent to the museum, was a five-story house with two bedrooms, two bathrooms, living and dining space, a roof terrace, and a carport. Its name was chosen to evoke a familiar material in capturing the concept of a sheer plastic, thinly wrapped residence.

We had recently completed Loblolly House, an off-site fabricated home on the Chesapeake Bay, and were seeking to advance our development of SmartWrap™, a lightweight, energy-gathering building envelope composed of a multi-layer skin just a few millimeters thick. Cellophane House™ refines these methodologies and demonstrates a new future that may change the way the industry models, constructs, and delivers housing.

ASSEMBLY

Cellophane House™ was assembled like a car: The whole construction was broken down into integrated assemblies, called “chunks,” that were fabricated off site, then delivered via trailers to the site and stacked on top of each other with a crane. Eighty percent of the construction was completed in six days.

Materials were selected to be lightweight, minimizing embodied energy, and reusable within existing recycling streams. The same aluminum frame used for Loblolly House was scaled up from two stories to five, enabled by a strengthening system of custom-designed steel connectors.

The SmartWrap™ skin was attached to that frame, with interior floors, ceilings, and partitions made of STAGE PEP-core. The skin was envisioned as a filter, selectively letting in daylight and seasonal heat and keeping out UV light and hot or cold air, depending on the season.

Many prefabricated designs succeed in breaking down a building into modules that can be quickly joined together, but they typically embody a top-down strategy: design a building, and then devise a system to make it work. Here, we began with the frame-plus-components system as a basis, allowing architecture to grow out of its opportunities and constraints. Unlike prefabricated housing in which originality and site-specificity may be lost in the manufacturing process, Cellophane House™ is a flexible system of building that enables multiple outcomes. The frame can accommodate a variety of materials to suit different needs, tastes, and budgets; the house can adapt to different sites and climatic factors, and interior floor plans can be easily rearranged.

DISASSEMBLY

The final experiment at MoMA was its disassembly. The house was deglazed, un-stacked, and disassembled at ground level using basic handheld tools. Parts were organized on pallets and removed from the site in two days. Virtually no waste was generated, and 100 percent of the energy embodied in materials was recovered. The only remnant was a patch of gravel in an asphalt lot.

clear-PEP® UV PC Stage

Key Features

  • Anti slip surface (DIN rating)
  • Easy installation
  • Easy to handle
  • Excellent Light-Scattering properties
  • Excellent UV and weather resistance
  • Exceptional load capacity
  • Innovative translucent optic
  • Load capacity up to 500 kg/sqm
  • Meets AUST BCA fire tests
  • Outstanding scratch resistance
  • Superior Impact Resistance

Applications and Functions

  • Automobile and boat
  • Awnings
  • Counter fronts
  • Hospitality & Exhibitions
  • Illuminated floors and landings
  • Pathways and walkways
  • Showroom flooring
  • Stairs
  • Trafficable mezzanines
  • TV sets
  • Outstanding scratch resistance

Availability of Clear PEP® UV PC Stage:

  • Size (mm): 2000 x 1000
  • Thickness (mm): 40

Colour

  • Translucent

Note: Custom sizes up to 80mm thick can be made on application

Go to the full details of clear-PEP® UV PC Stage >>

PROJECTS & NEWS

About Us

ISO-9001-2015

Allplastics Engineering Pty Ltd is a privately owned Australian business specialising in the machining, fabrication and supply of polymer/ plastic materials for industrial, building and architectural applications
more about us >>

Our Memberships

asga20logo20small

asofia20logo20small

ccofcNSW Business Chambercovid-safe-badge


Contact us

  • Email Enquiry
  • Tel: (02) 8038 2000
  • Fax: (02) 9417 6169
  • Address:  Unit 20/ 380 Eastern Valley Way, Chatswood, NSW 2067.
  • Opening Hours:
    Weekdays: 8:30am - 5pm
    Saturdays: 9am - 2pm (enquiries only/warehouse closed)

Allplastics on Instagram Allplastics on Facebook Allplastics on Twitter Allplastics on Linkdin Allplastics on Pinterest Allplastics on YouTube

review us on Google

Terms and Conditions
Privacy Policy